Sven Boehringer wrote:

quoted

We have done it. There shouldn't be much to do provided you have the
PCMCIA interface connected correctly.

There was a mistake in the Motorola manual on the MPC850. It involved
two lines having to be swapped.

That sounds interesting, can you please tell me which lines? Cause I'm
right on the way to
do such a interface...

And a little bit OT, but how do you implement the BCSR's? I looked for
the (ABEL)-Source which is provided with the Manual
(MPC8xxFADSMENGUM.pdf) but i found no good tool to extract the needed
pins...

Any help would be very pleasant,

Regards
        Sven Boehringer

Hi Sven,

	We were told that the RESET_B and the POE_B needed to be
swapped. Somewhere motorola has an app note on it.

Looking at the MPC850UM.PDF that I downloaded today they have corrected
the error. Our printed manual has the mistake.

RESET_B is connected to OP3
POE_B is connected to OP2


I can't find the register you are reffering to (BCSR). Could you spell
it
out?


Hope this helps.

--

*****************************************************************
  If you live at home long enough, your parents will move out.
*****************************************************************

Conn Clark
Engineering Stooge				clark@esteem.com
Electronic Systems Technology Inc.		www.esteem.com


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/