Re: 7400 mmu_init problem

On Sat, Apr 06, 2002 at 07:47:11PM -0500, Greg Griffes wrote:

The BDI2000 wouldn't work with my hardware for some reason.
It complained that it could not break on the boot vector.
Tried it with both hard and soft breaks.  Booting from flash, so,
maybe that has something to do with it.

This is usually because of an incorrect (not  sufficiently  adjusted)
BDI2000 config file. Pay special attention to the BOOTADDR parameter;
depending   on   your  board  configuration  this  is  0x00000100  or
0xFFF00100. If it is set incorrectly, you may hang the  CPU  and  the
BDI will not work.

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
Shakespeare's Law of Prototyping: (Hamlet III, iv, 156-160)
        O, throw away the worser part of it,
        And live the purer with the other half.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/