Re: MPC8xx, FEC and DP83847 !?

In message [ref] Dan Malek wrote:

quoted

quoted

The Motorola reference boards use port D for MII, but we
used PCMCIA/port A pins instead.

If someone is doing this, please send me some patches for the
driver when you get it working.  All of the 857s I have seen
are still using Port D for the FEC.  I guess I could make the
changes if someone else can test them.

Just grab our latest source tarball, and look  at  the  configuration
for the ICU862 board.

quoted

I supposed you're using PORT D for something else!?

The intention is to also be able to use Port D for the ATM UTOPIA
so you can have 10/100 and ATM on the same part.  This is really
the purpose of the 857, although I have yet to see anyone use it
that way :-).

Well, the ICU862 is such a board, based on a MPC862.

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
Things that try to look like things often do look  more  like  things
than things. Well-known fact.       - Terry Pratchett, _Wyrd Sisters_

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/