Re: enet rx doesn't work

In message [ref] you wrote:

I've tried to use the enet over the LXT905. Tx seems to work, but I'm not able
to receive data from it.
I've measured the rxd, rclk and rena pins (the RENA signal is aktive high), but
they seems to be ok too.

But I get no rx interrupt, the scc_enet_interrupt is never called when receiving
data.

Checked the pin configuration and the clock routing?

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
There's another way to survive.  Mutual trust -- and help.
	-- Kirk, "Day of the Dove", stardate unknown

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/