Re: [PATCH] My GT-64260 enhancements

Dan Malek [off-list ref] wrote:

I didn't know there was a "default" baud rate for Linux.  I think the lowest
I have ever seen is 9600, but I certainly wouldn't call it a default.  It
seems every one of the boards I have uses something different,

The debug console serial port rates are either provided by passing some
bootloader information to the kernel or by a kernel command line option.
Either one is locally configurable.

But if you don't specify the baud rate in any way, it'll default to 9600 except
on the EV-64260-BP.

Also I don't like calling the standard serial console "debug". A standard
computer running UNIX or a UNIX-like system must have a standard serial port as
the console for root to do sysadmin work, not a PeeCee video/keyboard. Just
like every standard VAX.

It shouldn't be a hard-coded value.  It should at least be the standard Linux
command line option.

That option works of course. I'm simply asking to remove the line from
arch/ppc/config.in that makes the EV-64260-BP port have a different default
from the rest of Linux, which I claim is inappropriate.

Bootloaders should simply use the port as it was
configured by the boot rom.

I'm not talking about any bootloader, I'm talking about the kernel (vmlinux).
My bootloader (ppc-linux-boot) doesn't know anything about UARTs at all, it
makes console user services calls to the firmware ROM to talk to the abstract
console device.

MS

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/