Re: SCC or SMC for console ?

Dear Laurent,

in message [ref] you wrote:

I need 4 serial ports at runtime, and was wondering if I should rather
use 2SMC + 2SCC or 4 SCC (or 1SMC + 3SCC).

Assuming that you need Ethernet: if you can use the FEC for Ethernet,
that it does not matter much; otherwise I'd recommend to use  2SMC  +
2SCC  or  1SMC  +  3SCC  so  that  you  have at east one SCC left for
Ethernet.

I need a console, but no hardware flow control (which would force the
use of SCC).

Should be no problem. The kernel on our FTP server was tested with  6
serial  ports  on  a  MPC860, with HW flow controll on all SCC's. The
only problem in such a configuration is that you have only 4 BRG's so
two ports have to share the baudrate with another port.

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
See us @ Embedded Systems Nuremberg, Feb 19-21, Hall 12 K01 (with TQ)

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/