Re: Question on the pcmcia module for ppc
From: Peter Desnoyers <hidden>
Date: 2002-01-04 14:21:20
Liu HongXun-a16975 wrote:
When I inserted ds.o, the driver tells me that "cs: socket 0 timed out during reset" I looked through the source code and the debug info. I found that a lot of the same messages as follows: GetStatus(0) = 0x190 ... Such info come from m8xx_pcmcia.c/m8xx_get_status. It seems that someone is not satisfied with the above return value and " get status " again and again. Then it quit.
To look at it a different way - the driver was unhappy with the value of the first inb() on an address in the card's I/O space. My first guess (been there myself) is that inb() and outb() aren't working to your card's I/O space. -- ..................................................................... Peter Desnoyers (781) 457-1165 pdesnoyers@chinook.com Chinook Communications (617) 661-1979 pjd@fred.cambridge.ma.us 100 Hayden Ave, Lexington MA 02421 ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/