On Mon, Oct 01, 2001 at 01:40:19PM +0200, Nils Krueger wrote:
quoted
quoted
Goody, which? :) I've got a 604/100 right here.
The one that looks like a HiFi, with 133 MHz 604.
It's called PowerStack Series E.
Same thing I've got.
quoted
quoted
Hmm. I sort-of wonder if the PS/2 changes a while back goofed something
up.
quoted
quoted
My kbd is fine too, and I'll try and throw a mouse on later this week.
Can you grab the bk version and go back to 2.4.8, .7, et al and see if
it works? I think some PS/2 stuff was done in maybe .5 or .6..
I had the same problem with 2.4.5, .7-pre3 and .8-pre3. I haven't watched
the interrupts then, but it showed the same symptoms. (keyboard, mouse,
network, scsi are stalled but graphic card is still working)
Okay, I just tried 2.4.17-pre8 (from _devel) on my PowerStack Series E,
and the ps2 mouse seems to be working with gpm (gpm -m /dev/psaux -t
ps2).
Although it is worth noting that if i did:
while `true`;do cat /proc/interrupts ; sleep 2;done
Interrupts seemed to stop eventually. It also takes ~100 interrupts for
a tiny mouse movement, which I'm not sure if is right or wrong..
One keypress or release of a mouse button causes about 20 interrupts and
sometimes one or two BAD interrupts. (BTW, it's the same on my so far most
stable 2.2.17) Should be normally 4 interrupts (and of course no BAD one)?
Odd. It seems to take 3 interrupts/keypress here (6 for up-arrow,
enter).
--
Tom Rini (TR1265)
http://gate.crashing.org/~trini/
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/