Re: 405 -- a little console help, part 2

Mark Pilon wrote:

I've got a little more info -- /bin/sash doesn't produce any
output and just sits there, echoing charachters typed.  I'll try poking
around w/ gdb/abatron but am not sure how to find the exec'd shell.

if I spawn ash w/ init=/bin/ash:
...
--  but at least I get a prompt and it seems to work.

That is very odd, I don't know why ash would work and sash does not.
Very strange indeed.

I'm not sure what the message "can't access tty; job control turned off"
means -- I'll have to get the source for ash and debug it.

This sounds like you do not have proper /dev/* populated..  i.e.
/dev/console, /dev/tty, /dev/pts, etc.  For initial system bringup you
can ignore that warning.  (However, keep in mind that ctrl-C, ctrl-Z,
etc job control will not work..)  This might also partially be a symptom
of ash starting as process 1, process 1 contains special rules in the
kernel as it is the init process.

--Mark

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/