Re: Root login...

"Prasad, Siva" wrote:

I used HHL Journeyman 2.0 PPC 7xx to build ramdisk for our custom PPC 750
board. When I try to execute, it gives the login prompt. But when I type
'root' and hit enter, it gives me back login prompt again. Basically it is
not logging in.

It looks like you are missing /bin/login.  Assuming the initscripts
started up properly, take a look at the various logs in "/var/log" and
you should see an error message from getty explaining what is wrong.

Once you add in /bin/login, you will need the pam shared lib,
/etc/pam.d/login and the assorted pam "module" (/lib/security/pam_*) for
what is specified in /etc/pam.d/login.

However, if you don't care about security then you can just create a
file /etc/pam.conf with the following:

# Permit an open system [Dangerous!]
other   account         required        pam_permit.so
other   auth            required        pam_permit.so
other   password        required        pam_permit.so
other   session         required        pam_permit.so

And make sure that you copy /lib/security/pam_permit.so

--Mark

/bin
bash cat cp date echo ls mount ping ps sh stty umount

/dev
console ram0 tty ttyS0

/sbin
fsck getty halt ifconfig init insmod lsmod modprobe reboot shutdown sulogin

/etc
fstab (with /dev/root, /dev/ram0 and /proc)
passwd
group
inittad (as is from HHL Journeyman)
rc.d (as is from HHL Journeyman)
init.d (as is from HHL Journeyman)
default (as is from HHL Journeyman)

and create few other directories...
/root /proc /mnt /usr /tmp /var

-- Siva

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/