Re: BK to CVS? + MDIO

In message [ref] you wrote:

For PPCBoot, I made MII serial interface routines for the EST
(WindRiver) SBC8260 board.  This was a general purpose implementation,
customizable for different hardware by changing the #defines that
toggled the I/O port pins.  I also added a "mii" command that allows
you to read and write the MII registers from the command line.  I was
able to read and write the EnableSemi (Lucent) PHY, which is a "dongle"
type PHY provided by EST.  This could be helpful for you for poking
around in the PHY.  If your needs are not too complex, it may be
sufficient to initialize the PHY and let it run autonomously.

I submitted patches to Wolfgang, but it appears they have not been
rolled into the source yet.  If you want a patch, reply to my email
address and I'll send you one.

Sorry for the delay, but it's my first day  in  the  office  after  3
weeks  of vacation, and I'm still trying to figure out where to start
working on all the things that piled up...

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
C makes it easy for you to shoot yourself in the foot. C++ makes that
harder, but when you do, it blows away your whole leg.
                                                 -- Bjarne Stroustrup

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/