'PowerBoot' is the firmware I am using.

I preferred to use 2.2.14 because, it has PowerCore option, where I can use
750  with minimal changes.

I am not making any calls to firmware after that. This 'mtmsr' instruction
is third instruction and it hangs with out finishing. What might be the
problem that I have to fix to get this working.

-- Siva

-----Original Message-----
From: Tom Rini [mailto:trini@kernel.crashing.org]
Sent: Wednesday, September 26, 2001 3:43 PM
To: Prasad, Siva
Cc: linuxppc-embedded@lists.linuxppc.org
Subject: Re: mtmsr...


On Wed, Sep 26, 2001 at 09:40:31AM -0700, Prasad, Siva wrote:

quoted

PowerPC 750 on a custom board.
I tried both the bitkeeper source (2.4.10-pre11) and also

HartHat Linux CDK

quoted

1.2 version (kernel 2.2.14). Same problem in both the kernels.

Well, both of those sources are very different.  Are you running this
board in 'PReP' mode?  Your own firmware or what?  Anyhow, if
you're making
any calls back to the firmware later on, you must not mess w/
the MSR value.

--
Tom Rini (TR1265)
http://gate.crashing.org/~trini/

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/