Re: Ctrl-C does not work

Navin Boppuri wrote:

Hello everyone,

Ctrl-C does on work on my serial console when I use the sample file
system from Hardhat 1.0 toolkit. It , however, works with the Hardhat
1.2 toolkit sample file system. I am using the same kernel to test both
the file systems. What could be different between these two file
systems?

Thank you,
Navin

Actually control-c should _NOT_ be working on Cross Dev Kit 1.0, or
1.2.  If it does work in one you are lucky.  There is a problem with the
way the serial consoles are started on CDK 1.0 and 1.2, it was left up
to the serial driver to turn on or off the control-c activation.

Under HHL 2.0, this problem has been resolved by using getty and login
to start a serial connection.  login has a patch that ensures that the
control-c stuff is enabled.

I would highly recommend that you move forward to HHL 2.0 if you can, it
has a lot of these minor annoyances fixed.

--Mark Hatle
MontaVista Software, Inc.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/