Ira Weiny writes:
>
> As some of you may know I am trying to get an IBM microdrive working on
> my TiBook. I know there is an issue with irq's which I am trying to
> work out but I have run into another issue I don't understand.
>
> I get the following message in my startup:
>
> kernel: Can't get bus-range for /pci@f2000000/cardbus@1a
>
> I rsync'ed with Ben H's kernel recently and I found that the ioports and
> memory ranges I had set for cardmgr were not working anymore. So I
> started changing them. In my efforts to find ranges that worked I found
> that "cat /proc/ioports" would result in a segfault. From what I can
> tell it is running off the end of the buffer in vsnprintf?
>
> Before the Cardbus modules are loaded "cat /proc/ioports" works fine.
>
> So my question is, what does the above message mean? It is something
> which is worked around later, or could it be the root of my problem?
>
> Thanks,
> Ira Weiny
> iweiny@acm.org
>
>
I use the following in /etc/pcmcia/config.opts
include port 0x0fff-0x1fff
include memory 0x90000000-0x90ffffff
AFAIR it worked with my microdrive, but I don't have it to test right
now.
Marcus
--
---------------------------------------------------------------------
Dr. Marcus Metzler
mocm@netcologne.de http://www.metzlerbros.de
mocm@convergence.de http://www.convergence.de
Convergence Integrated Media GmbH
Rosenthaler Str. 51
D-10178 Berlin
---------------------------------------------------------------------
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/