Re: SCSI PMC card

On Fri, Aug 24, 2001 at 03:23:10PM -0400, Brian Waite wrote:

Ok now I moved up to a 2.4.9 kernel from the linuxppc_2_4_stable tree and I
see the same problem. Here is the output of debug being defined in both
drivers/pci.c and arch/ppc/kernel/pci.c. Below are the dumps of 2 boots, one
without the SCSI card attached and one with the SCSI card attached to the
baseboard. Does anything looks suspicious? This card did work on the base
under 2.2.18 when I initiaslly tested it.

Everything looks good...excepting the unassigned resource (which isn't
used by the tulip driver anyway).  I've never seen a hard hang except
on a new bridge design bringup so you're going to have to trace the
flow through all the resource assignment process.

PS I can't seem to get my 2.4 devel tree to boot on the 2400, the
decompress_kernel fails with fffffffd.

I think Gabriel Paubert is the only other person I've seen using  Linux
on a 2400 lately...maybe he'll chime in.  It could be a temporary effect
of the bootloader reorg right now...prep is being touched.

Regards,
--
Matt Porter
MontaVista Software, Inc.
mporter@mvista.com

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/