Re: lcd17 kernel patches?

Olaf Hering writes:
 > Try this one in the meantime:

OK, this mostly works with the 2.4.7 kernel sources, but there's one
important difference between the building a kernel this way and
running that prebuilt 2.4.2.  The prebuilt kernel has working video
immediately on booting.  The kernel I built with your patch has no
video at all until I run 'fbset 1280x1024-60'.  Clearly there's more
to that prebuilt 2.4.2 than just an additional mode definition.

But this will do for now - thanks for the patch.  I created an init.d
entry which runs the fbset command and I set it to run very early
(00).  So at least I can see some of the boot messages as they go by.
Maybe I could put it in inittab or rc.sysinit to get it even earlier.
But I might rather wait for a real patch.




--
reshapiro@mediaone.net


** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/