Re: MVME 5100 & Linux

On Mon, Jul 02, 2001 at 03:46:16PM +0200, Lionel TAILLURAT wrote:

I'm trying to install the Debian PPC Linux 2.2R0 on an MVME5100 + MVME 761 +
IPMC 761.

For that I download the Prep Image by TFTP, and the only thing I have is :

PPC6-Bug>nbo
Network Booting from: I82559, Controller 0, Device 0
Device Name: /pci@fe000000/pci8086,1209@e,0:0,0
Loading: bootfull.bin

Whoa.  The 5100 is not a PReP-like system even though it has the
capability to boot an image with a PReP header on it.  You're
trying to boot Debian/PPC's old 2.2 kernel on this system that
is an a CHRP memory map and has UARTs at non-standard locations.
That's not going to work.

I have seen in the Mailing list archive that there was some problems using
Linux with the MVME 5100 and especially with the residual data.

Is there is a correction of this problem ?

What should I do to have Linux working with this board ?

You should use the MVME5100 port from the linuxppc_2_4_devel tree.

--
Matt Porter
MontaVista Software, Inc.
mporter@mvista.com

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/