Re: bootloader for deeply embedded 405CR

*** Please send PPCBoot related messages to the PPCBoot mailing list ***




In message [ref] you wrote:

quoted

For the Walnut it should be a simple thing to do:
        make WALNUT405_config
        make

I have built a CVS ppcboot as you suggest, however
it appears to expect being burned into flash
memory.

Right. That's what most of the people do.

What I would like to do is GDB-load an ELF ppcboot
into the Walnut's 32MB SDRAM mapped at address 0,
then execute it in place. Then I want to GDB load a
kernel at another higher address, and use ppcboot
to boot it. Is this already possible or will I have
to modify Makefiles, linker scripts, and possibly
code?

You have to modify the link address at least; but most  probably  you
have  to  modify  other  code  as  well - for instance to prevent the
exception handlers to be installed, etc.

Why don't you do what everybody does, and write the image to flash?

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
"Here's a fish hangs in the net like a poor man's right in  the  law.
'Twill hardly come out."     - Shakespeare, Pericles, Act II, Scene 1

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/