Re: Where get the Linux Init Source for 8xx

Wtao,

You can also find CPU PWRUP code for the MPC850 in the QSLinux release,
downloadable from ftp://qslinux.org.  It contains code to "kick" the
watchdog as it decompresses the kernel.  It also provides a very
flexible scheme for configuring processor clock speed, console port
setup, etc.  Documentation can be found at http://qslinux.org.

Regards,
Daris Nevil
SNMC


simitel0299 wrote:

Hello, all:
    Would you like to provide me with the source codes of LinuxPPC initialization for MPC8xx, just from the CPU PWRUP Reset to the OS and finally to the Application ? If available, the corresponding documents will be OK!
    Thank you for your help!
    Best Regards!
                                  Wtao
                     2001/3/30

______________________________________

===================================================================
ÐÂÀËÃâ·Ñµç×ÓÓÊÏä (http://mail.sina.com.cn)
ÍøÀïÑ°Ëýǧ°Ù¶È!ûÓÐ"ÁÄÓÑËÙÅä",ÔõÄÜ"³ÉË«³É¶Ô"? (http://newchat.sina.com.cn)

--
Daris A Nevil
Simple Network Magic Corporation
401 Kentucky Lane
McKinney, TX 75069
214-793-7757
dnevil@snmc.com
www.snmc.com
quickstack.com
qslinux.org

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/