Re: Linux on a 823FADS

Quoting "Bruno R. Barreyra" [off-list ref]:

Hi.

I've been encharged with the (ungrateful) mission of making Linux run on
a 823FADS board. I've already got the latest version of ppcboot (0.8.1)
up and running from Flash, but I'm struggling to get Linux to boot.

How am I supposed to build the kernel? It seems the FADS port has long
been abandoned. I'm trying to revive it, by including it back into the
config and making necessary changes in order for the kernel to compile.
Am I on the right track?

Hi Bruno,

I use mpc8xx-2.2.13 along with some patches from www.solutions4linux.de
on a FADS823 board (Rev. Pilot from 1997). The Board has 2 MB flash and
8 MB dram. Linux runs from flash with an initial ramdisk but you can use
a nfs-mounted root directory too. I use ppcboot 0.7.2 at the moment.

Christian


Dr.-Ing. Christian Schroeder
Institut fuer Mikroelektronik- und Mechatronik-Systeme
Langewiesener Strasse 22
98693 Ilmenau
Telefon: +49 3677 678315
Telefax: +49 3677 678337
Mobil:   +49 173 5789172
e-mail:  christian.schroeder@imms.de
www:     http://www.imms.de/~christi/cs.html
pgp:     finger christi@finger.imms.de

-------------------------------------------------
This mail sent through IMP: imp.imms.de

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/