you need to change a config file.

in /etc/sysconfig/pcmcia

change the i82365 to m8xx_pcmica

"Ruhland, Paul" wrote:

Matthew,

I used 'pcmcia-cs-3.1.19.tar.gz', 'hhl-8xx_pcmcia-3.1.19.patch', and
'hhl-8xx-kernel_pcmcia.patch' from the mvista site.

After adding MBX board specific code to 'modules/m8xx_pcmcia.c' the package
succesfully compiles.  However, I now get the following errors when I try to
load the module(s):

----------------------------------------
sh-2.03# /etc/init.d/pcmcia start
Starting PCMCIA services: modulesLinux PCMCIA Card Services 3.1.19
  kernel build: 2.2.14 #10 Tue Nov 21 11:37:36 GMT-5 2000
  options:  none
/lib/modules/2.2.14/pcmcia/i82365.o: /lib/modules/2.2.14/pcmcia/i82365.o: No
suyds: no socket drivers loaded!
/lib/modules/2.2.14/pcmcia/ds.o: init_module: Device or resource busy
 cardmgr.
cardmgr[74]: starting, version is 3.1.19
sh-2.03# cardmgr[74]: no pcmcia driver in /proc/devices
cardmgr[74]: exiting

sh-2.03# lsmod
Module                  Size  Used by
pcmcia_core            38032   0
sh-2.03#
-----------------------------------------
I was under the impression from your previous post that the socket driver
was part of the patch...am I mistaken?  If it is...I assume I must load it
first...what is it called?

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/