Re: glibc and kernel build problems (EST8260)

For glibc, I have read the HowTo and I think I applied the proper glibc
patches.  I have also patched my gcc specs file.  Here is where I am
dying:

I would go to MontaVista http://www.mvista.com/ and get their CDK.
They have already done this work and more.

ftp://ftp.mvista.com/pub/CDK/1.2/

make[2]: Entering directory
`/home/ford/linux/src/linuxppc_fsm/arch/ppc/mm'
powerpc-linux-gcc -D__KERNEL__ -I/home/ford/linux/src/linuxppc_fsm/include
-Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing
-D__powerpc__ -fsigned-char -msoft-float -pipe -ffixed-r2
-Wno-uninitialized -mmultiple -mstring    -c -o init.o init.c
init.c: In function `__ioremap':
init.c:418: `isa_mem_base' undeclared (first use in this function)
init.c:418: (Each undeclared identifier is reported only once
init.c:418: for each function it appears in.)
init.c: In function `hash_init':
init.c:1486: warning: int format, long int arg (arg 2)
init.c: At top level:
init.c:661: warning: `get_mem_prop' declared `static' but never defined
make[2]: *** [init.o] Error 1

You need to change arch/ppc/mm/init.c

dell 1060} diff -c ~/bk/fsmlabs-linux-2.4/arch/ppc/mm/init.c .
*** /usr/people/diekema/bk/fsmlabs-linux-2.4/arch/ppc/mm/init.c Sat Nov 11 09:06:29 2000

--- ./init.c    Sat Nov 11 10:28:43 2000

***************
*** 408,413 ****

--- 408,414 ----
         */
        if ( p < 16*1024*1024 )
                p += _ISA_MEM_BASE;
+ #if !defined(CONFIG_4xx) && !defined(CONFIG_8xx) && !defined(CONFIG_8260)
        /*
         * Some drivers give us the physical bus address when they
         * should give us the physical cpu address.  For those cases

***************
*** 416,421 ****

--- 417,423 ----
         */
        else if ( p < PCI_DRAM_OFFSET )
                p += isa_mem_base;
+ #endif

        /*
         * Don't allow anybody to remap normal RAM that we're using.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/