Re: GDB for host development platform

John,

Sounds as though you did not connect to the target correctly.  I have
written a procedure we use to connect to a PPC target over ethernet.
You can view this at:

	http://qslinux.org/docs/cross/gdb/index.html

Hope this helps.

Regards,
Daris Nevil


john zhan wrote:

I have now successfully build GDB-4.18 for linux/ppc.
Both target and host are powerpc-linux.
When I was trying to run a executable in my target
hardware(8xx) with gdb(target for exec),
 e.g. hello,
GDB said
"
Starting program: ./hello
Don't know how to run.  Try "help target".
"
Questions:
    1. what's going on it?
    2. Does(Did) anyone do the same thing?
    3.The cross-debugger + target gdb server with a serial connection
         is the unique choices?
    4. I wonder which is the best way to debug a linux/ppc application
        on the embedded platform.
    5. What do you think a full host development environment
        (including native comilper,debugger etc) in the embedded
        system.

thank for any response.

regards.
john zhan.

--
Daris A Nevil
Simple Network Magic Corporation
401 Kentucky Lane
McKinney, TX 75069
214-793-7757
dnevil@snmc.com
www.snmc.com
quickstack.com
qslinux.org

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/