Re: Debugger Problems

In message [off-list ref] Andreas Schreckenberg wrote:

Our board contains a MPC750-466 MHz CPU, it's no embedded system in the

Why not? You can build an Embedded System around any CPU :-)

There is no firmware. The board has flash memory and jumps directly to
ram after reset.
Can I use ppcboot for my board ?

Yes, sure. You will have to make some modifications,  of  course.  So
far nobody ported it to a 750 board yet.

I thought it's only for special TQM8xx boards.

No. We have support for several MPX8xx and  IBM  40x  based  systems:
TQM823L,  TQM850L, TQM855L, TQM860L, ETX094, ADCIOP, CPCI405, COGENT,
FADS, SPD823TS, FPS850L, MBX, SM850,  IVMS8.  There  are  some  other
systems,  where  I  have received success reports from the developers
who ported PPCBoot to their systems, but I never received patches.

Ports for MPC82xx systems are in the works.

Perhaps I have read not enough about ppcboot... :-)

Definitely :-)

I want to build a kernel and boot via ramdisk support, the board communicates
with a serial port.

That's fine. You could use the serial port to download a Linux kernel
image (using S-Records and/or kermit binary protocol).

I want to download my code via JTAG/BDM as a raw binary or elf file in the ram memory.
(there are problems with elf and EST, because the EST debugger handles
the kernel and ramdisk sections not correct, bin2bin which I found in
the mailinglist seems to fix this for .bin files.)
Finally all the stuff should be burned into flash.

That's fine. Just get working tools.

I turn on the MMU and jump via an rfi instruction.
(first init the srr0/srr1 registers) then the debugger confuses this situation
and shows wrong code in the disassemby window.

Is there any workaround availible ?
Or is there no chance to use the EST Debugger with virtual memory ?

Sorry, I can't help here. We didn't buy this device  exactly  because
of this problem (and because of the price).

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
"Unix is simple, but it takes a genius to understand the simplicity."
					             - Dennis Ritchie

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/