Re: Debugger Problems

In message [ref] you wrote:

I want to port the Monta Vista Linux Kernel on our
customspecific board. I want to use the EST Debugger

Which firmware are you running on your board? Do you know  about  the
PPCBoot project (http://ppcboot.sourceforge.net)?

from Windriver, but there are some problems with using
the MMU, specially while debugging the startup code.

Did you check the Embedded PowerPC HOWTO at
http://members.nbci.com/greyhams/linux/PowerPC-Embedded-HOWTO.html ?

Is there anybody with experience
in using the EST Debugger with Linuxcode ?

Can you explain what "some problems" means?

One typical problem in bad intialization of the Debug Even  Register;
make sure DER is set to 0x2002000F or similar before starting Linux.

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
The use of Microsoft crippleware systems is a sin that  carries  with
it its own punishment.
         -- Tom Christiansen in [off-list ref]

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/