Re: bad vidmode on debian install

On  8 Nov, Steven Hanley wrote:

it is a Mach 64 video card

quoted

Do you have 834x624 and more than 8 bit color depth? If yes, change the
resolution or set the color depth to 8 bit.

wouldnt doing this involve the passing of a video=atyfb:vmode:8 or some such
?

vmode for resolution, using values available in nvvideo's manpage
cmode for color mode (bit count works).

in reference to the nervous text, I get this on my PDQ when the mclk is
set incorrectly.  this can be specified using the mclk: param.  my
cmdline is "video=atyfb:vmode:14,cmode:32,mclk:100", but I am aware that
earlier systems, even wallstreets use smaller mclk values.  the
default/autodetect in the kernel does not work for me.  could try 83 or
60, two other fairly successful values IIRC.

Hope this is helpful.

--
Joseph P. Garcia      jpgarcia@execpc.com      jpgarcia@lidar.ssec.wisc.edu
CS Undergraduate                      Student Employee - Systems Programmer
University of Wisconsin - Madison                            UW Lidar Group


** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/