Re: initial console

On Wed, 18 Oct 2000, Gabriel Paubert wrote:

CONFIG_SERIAL_CONSOLE is missing ?

grep CONFIG_SERIAL_CONSOLE .config
CONFIG_SERIAL_CONSOLE=y

console=ttyS0

With or without the same result...

quoted

pc_keyb: controller jammed (0xFF).
pc_keyb: controller jammed (0xFF).
and so on...

Expected with an MVME2300.

The error message disappeared after a few hundred of message.

P.S:  I still don't understand why my bootloader would not properly
reconfigure the PCI resources to give you access to the SCSI board.
Do you have somewhere a printout of the bootlog, it should list all the
PCI resources before and after reorganization.

Sorry, I've lost the output of the kernel I have compiled with your patch.
Can I use your patch with the latest linuxppc_2_5 from fsmlab ?
If so I'll try it one more time. But the actual kernel (from
fsmlab) recognize and configure my SCSI board.

xavier

33 (0) 1 69 15 79 59
De chacun selon ses forces, a chacun selon ses besoins


** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/