Re: [linux-fbdev] Re: Video driver bug

On Mon, Oct 16, 2000 at 05:22:58PM -0700, James Simmons wrote:

quoted

quoted

quoted

Well, my understanding is that MOL needs to be able to "probe" for all
supported mode. Doing so on a visible console would definitely be hell.
It does that in order to setup the MacOS-side driver mode list.

According to Samuel's last post, MOL needs both var and fix for probing.

Yes this is really bad. The way most drivers are written is that testing
var does not change fix. If you grab fix after testing the video mode it
will be for the current set resolution. Not the one you are testing
for. For most drivers you need to physically set the mode to change
fix. Sometimes the information in fix can only be obtained from the
hardware and this requires a video mode change.

What MOL needs from the fix structure is the bytes_per_line field and
the page_offset of framebuffer. This information is necessary in order
to make it possible to switch seamlessly (by using the MMU) from a
RAM based framebuffer to the physical one.

What I'd like to see is good way to obtain these parameters without
actually setting the video mode. And, of course, it would be nice
if they were guaranteed to be constant for a given video mode.

Cheers,

/Samuel


----------------------------------------------------------
 E-mail [off-list ref]  WWW: <http://www.ibrium.se>
  Phone/fax: (home) +46 8 4418431, (work) +46 8 7908470
----------------------------------------------------------

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/