Re: Going from 2.2.12 to 2.2.17pre10

Gabriel Paubert [off-list ref] writes:

On 6 Jul 2000, Michael Lundkvist wrote:

quoted

Please don't tell me my 2.2.12 partitioned disk is wrong. :)

What's your version of fdisk ?

It seems like Hollis Blanchard was right so I'm doing a reinstall with
2.2.16 instead.

Under 2.2.12 dd if=/dev/hda of=xxx bs=512 count=1 and see what comes out.
Can PPCBUG actually boot from these disks ?

Nope. I think I'll go for Bugboot. Ramix also talked about the
possibility of modifying PPCBug to add support for the Ramix 233.

quoted

Where do I go for the best LinuxPPC 2.4 kernel for MVME-boards? Is it
fsmlabs Bitkeeper repository?

I have 2.4.0-test2 running on an MVME2600, look at:

	ftp://vlab1.iram.es/pub/linux-2.4

did not try the MVME2400 yet (they are all in use for real tasks, I'm
waiting for more and have to develop on the 16Mb MVME2600 :-(). But I
only have SCSI disks or NFSRoot.

OK. I'll try that on a MVME2400.

We have ~25 MVME2400 just lying around here since they haven't been
able to get VxWorks working properly on them yet. :)

I have a 2.2.16 kernel compiled but never booted, I could give you R/O
access to my BK trees if you want (but the machine on which they are is
not up 100% of the time).

	Gabriel.

How much difference is there between that and the main kernel?

The main reason I'm moving from the 2.2.12 is that it wasn't stable
under load on the MVME2400. I figured it was pointless to try to debug
it on an old kernel.

/Micke

--
ml@epact.se

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/