On Fri, Jun 16, 2000, Dan Malek [off-list ref] wrote:

quoted

Does the "stealth" serial port for blue-G3 work with Linux ?

I use them in my old iMac, new iMac (rev. D), iMac DV, and in my G4
server.  If the blue-G3 uses the same kind of modem as any of these,
and if the Stealth folks claim it will work in the G3, I would suspect
it works fine.  There is a challenge with the iMac DV, because they
don't make a card specifically for that machine.  I used a G4 version,
removed the header pins and soldered the cable directly to the board.
Tight fit, but it works.

I confirm, it works on the B&W G3, it's plugged on the good old SCCs of
the mac-io "coffee-machine"

Ben.


** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/