Re: EST SBC8260 Question

On Fri, May 26, 2000 at 12:02:37PM -0400, Dan Malek wrote:

quoted

Can anyone who's using this board please shed some light
on what's going on?

It depends upon the type of DIMM you are using.  Mine has the 2M x 64
DIMM, so it uses only /CS2 to get the 16 Mbyte space.  It also depends
upon the DRAM controller configuration.  Make sure you have the DRAM
controller properly configured to route the address lines.

The vxWorks BSP expects a stick with one bank of 16MB SDRAM.  If you didn't
get such a stick from EST, I'd go back and complain.  Alternatively, you
could put a stick in that has a bank that is at least 16MB.  I have a 128MB
stick in mine and it happily pretends to be 16MB.


Neil.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/