Re: Xinerama Support?

On Thu, 30 Mar 2000, Michel Dδnzer wrote:

quoted

I haven't swapped over from sawmill, but the significant difference in speed
between the two is pretty important to me (since I'm not running a new
machine with accelerated X support--just an old 8500 with a Voodoo3).

I also like Sawmill very much, but the tdfx driver for Voodoo3 should be very
well accelerated - have you tried Kostas' patches to make it work?

  The tdfx driver won't work without PIO support for now, for my machine
i mmap the right iobase but obviously this isn't going to work in other
machines so its not on much of use for other people.

I am working in fbdev support in the tdfx driver but its not ready yet
and fbdev doesn't make this easy at all, for example if tdfxfb uses
a hw cursor the fb memory you mmap starts at an offset and you have no
way to know what this offset is, the xdriver *has* to know this to
program the command fifo :(

quoted

I set up two different monitors, two different "device" sections, and two
different "screen" sections.

Sounds good to me, but then I haven't tried Xinerama yet.

You also need to tell the xserver which screens to use, here is what i use

Section "ServerLayout"
  Identifier "Main Layout"
  Screen "myScreen1"
  Screen "myScreen2" RightOf "myScreen1"

  InputDevice "Mouse1" "CorePointer"
  InputDevice "Keyboard1" "CoreKeyboard"
EndSection

quoted

However, I read on here that fbdev has to have a bus ID to work, and there
is none (that I'm aware of) on my internal video.

Nothing about a video adapter in /proc/pci (or the output of lspci)?

  If the internal video doesn't isn't in /proc/pci then you have no
problem, the xserver won't detect the card so you can go away without the
BusID line.


  Kostas


** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/