Re: [linux-fbdev] [PATCH 2.3.x] fbdev reversion

On Tue, 14 Mar 2000, Geert Uytterhoeven wrote:

quoted

I can code those fixes, but I'm not sure what solution has most chances
of beeing accepted (especially changing /poc/bus/pci semantics). The
problem is that exporting an IO address alone (without the iobase) has
really no meaning on arch that don't have a x86-like separate IO space at
the CPU level.

Indeed, there is one and only one CPU address space on _all_ architectures
except x86 (even HP's IA64 has does not have the silly I/O space). This
makes /proc/ioports an heresy while /proc/iomem is reasonable. How do you
handle I/O accesses in a machine with several bridges which have
independant PCI I/O spaces which a) appear at discontiguous physical
addresses b) map to the same or overlapping range of I/O addresses c)
support drivers which access hardwired I/O addresses ?

That's simple, there is no solution ;-)(especially if, god forbid, several
buses have an ISA bridge) So you have to select your goals:

- support non-transparent bridges, which is what PPC bridges are,
as "transparently" as possible, this will give support for non transparent
bridges (DEC21554) used in clusters almost for free

- get rid of iobase since the number of instructions which load iobase
into a register in an average kernel is far from negligible and this will
save a few pages: in some sequences it's about 30% of the instructions

- maintain maximum compatibility with existing code (don't need to modify
most drivers),

I think this is possible provided you accept to kill condition c) above,
forcing to modify many ISA drivers. This probably makes it a 2.5 task...

I might even give it a try because it would make inserting my VME driver
and devices inside the resource tree feasible, while it's currently a
mess.

	Gabriel.


** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/