Re: LinuxPPC2000 on MPC860

Ruedi.Hofer@ascom.ch writes:

Changing the following values from

quoted

linux01:/usr/nfs/tftpboot/dev # l cua0 console ttyS0
crw-------   1 root     tty        5,   1 Feb 25 08:18 console
crw-------   1 root     tty        5,  64 Feb 25 08:05 cua0
crw-------   1 root     tty        4,  64 Feb 23 11:44 ttyS0

to

quoted

linux01:/usr/nfs/tftpboot/dev # l cua0 console ttyS0
crw-------   1 root     tty        4,  64 Feb 25 08:26 console
crw-------   1 root     tty        4,  64 Feb 25 08:26 cua0
crw-------   1 root     tty        4,  64 Feb 23 11:44 ttyS0

or to

quoted

linux01:/usr/nfs/tftpboot/dev # l cua0 console ttyS0
lrwxrwxrwx   1 root     root            5 Feb 25 08:29 console -> ttyS0
lrwxrwxrwx   1 root     root            5 Feb 25 08:29 cua0 -> ttyS0
crw-------   1 root     tty        4,  64 Feb 23 11:44 ttyS0

didn't help, unfortunately. Only the first (and original) setting produced
an output at all!

The first version is the only correct one.
The "tty_io.c: process 1 (swapper) used obsolete /dev/cua0 - update software to use /dev/ttyS0"
is a non-harmful bug in uart.c. Just ignore it or change the first
occurence of TTYAUX_MAJOR to TTY_MAJOR.

Does someone know where the initial stdin, stdout settings are configured??

They point to /dev/console, which is your boot-console.

The /dev/stdin points somewhere to /proc/self/fd/0. At this time of boot, /proc
is not mounted yet !!!

/dev/stdin, /dev/stdout and /dev/stderr doesn't have anything to do
with anything.

//Marcus
--
Signature under construction, please come back later.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/