Re: gdbserver

quoted

quoted

quoted

quoted

"dony" == dony  [off-list ref] writes:

dony> Jesper Skov wrote:

quoted

quoted

quoted

quoted

quoted

quoted

"dony" == dony [off-list ref] writes:

dony> Hello,

quoted

dony> Now I want to use gdbserver to debug my test app.  Running
dony> "gdbserver :6666 ./mytest" on the target (Powerpc 860) show a
dony> message: Process ./mytest created :pid=8 But I don't know how to
dony> run gdb on the host (X86). The README doesn't seem to explain
dony> clearly . It says first running "gdb mytest" on the host and
dony> then "target remote mytarget:6666".  But I don't understand
dony> something about "gdb mytest" . At this time should I run a x86
dony> "gdb" or something like "powerpc-linux-gdb"? And the "mytest"?

quoted

 mytest is the same executable you run on the target. gdb you run
on the host would be powerpc-linux-gdb (i.e., cross-debugger),
thus:

target:> gdbserver :6666 ./mytest

host:> powerpc-linux-gdb mytest [...]  (gdb) target remote
mytarget:6666

dony> Is it compiled with x86 gcc or cross-compiled with
dony> "powerpc-linux-gcc"? Really I am very confused at this point:-((

quoted

 mytest is compiled with powerpc-linux-gcc.

dony> "powerpc-linux-gdb" is compiled with gcc or powerpc-linux-gcc?

gcc. You should look at one of the FAQ/HOWTO/READMEs/Home pages on the
sucject of embedded development. I think there was posted a small
howto on compiling the components a few days back. Check the archive.


One question: you are using an x86 host, right? If you use a PPC host,
you can just use the preinstalled GDB/GCC when building/debugging the
target binary.


dony>How do you build you powerpc-linux-gdb?
dony>I copy a gdb-4.17.tar.gz from LinuxPPC R4 CD.
dony>When I untar and decompress it, I type the following  under gdb-4.17/gdb
dony>directory:
dony>
dony>	./configure --target=powerpc-linux
dony>	make
dony>
dony>	It fails to compile and say:
dony> make:*** No rule to make target `../bfd/bfd.h`, needed by `blockframe.o`.Stop.
dony>
dony>Yes, there is not bfd.h under gdb-4.17/bfd directory.
dony>Do you know why?
dony>Thank you very much.


I don't know why. It's an old debugger. I think we keep a more recent
version / CVS tree on sourceware.cygnus.com. It may work better. The
howto I mentioned before included links to the archives used, as far
as I remember.

Jesper

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/