I just placed the latest MPC860T FEC driver on ppc.kernel.org.
This seems to work with the Embedded Planet CLLF.  It is a
pretty bad hack, as the driver should really determine many
of the things in #ifdef's dynamically.

Another thing.  On the "back" side of the CLLF, at the edge
near the four switch pack, you will find an unpopulated R08.
Place a jumper wire across this, as it is the source of the
PHY link change interrupt to the Port C pin.  Future CLLF boards
will have this populated.

And another thing.  This driver doesn't seem to work correctly
on the 860P version of the boards.  I thought I found all 860P
differences, but I guess I missed something.  I am working on it,
and if you have one of these boards, please let me know.

Try to initialize PDDIR with 0x1fff instead of 0x1c58.

-- Dan

Ralf


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/