Re: Stock 2.2.14 won't boot

"Michael R. Zucca" wrote:

No errors during make, otherwise I wouldn't have a kernel to boot :-)

Good call :)

quoted

What fails during boot..?

BootX switches to the black screen where it informs me of the kernel
version and a few address offsets (like video address, etc.) All of this is
normal. It just hangs there and doesn't progress.

Okay, well, I might work backwards, see what is the last thing that gets outputed,
and try either disabling that, or whatever would come next...

quoted

What are you
configuring into the kernel that is causing it to fail...?

Nothing especially spectacular. 604, PowerMac, ati framebuffer, bootX
console support, pmac serial support, pmac floppy support, vga console,
mace ethernet, adaptec PCI scsi support, internal SCSI support (53C support
not the other kind), DMA sound for awacs, some file systems, PPP, etc.

I might make sure that you don't have multiple things compiled for the same
support (eg. powermac floppy support, atapi floppy support and pc floppy
support...)

I'm not compiling in anything I haven't in past versions.

I am booting off of a drive attached to the PCI scsi card but that
shouldn't matter as this works fine from older kernels.

<drawing a blank>

HTH
--Nelson Abramson

--
"Every time you get a dialog box you don't understand, you ought to get a nickel
 from Microsoft, and every time it crashes, you should get a dollar.  That would
 make Bill Gates homeless and me a rich man." --Ben Schneiderman, University of
Maryland computer science professor
Courtesy of 1984: http://www.1984-online.com/facts.html


** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/