Re: GLIBC wont compile for MPC860

quoted

quoted

quoted

quoted

Scott Wood writes:

Scott> Graham Stoney wrote:

quoted

Scott Wood writes:

quoted

The MPC8xx have no floating point, so it should be compiled with -msoft-float,
(I think)...  ./configure --without-fp  will do it.

Is this implied when gcc has been configured --with-cpu=860?

Scott> I don't think so...  I put -msoft-float into the sysdeps/powerpc/Makefile and I see
Scott> it twice below, so I would imagine that if you use both flags then -msoft-float
Scott> will be used.

	Unfortunately, the people who wrote PowerPC support for glibc did
not create a sysdeps/powerpc/fpu directory containing FP-specific code.
There currently is no way to disable FP code in glibc-2.1, but I believe
that the maintainers were suppose to fix this for glibc-2.2; I do not know
about the status.  People who have been working on Linux for embedded
processors have been building glibc somehow, but I do not know the details.

David
===============================================================================
David Edelsohn                                      T.J. Watson Research Center
dje@watson.ibm.com                                  P.O. Box 218
+1 914 945 4364 (TL 862)                            Yorktown Heights, NY 10598

[[ This message was sent via the linuxppc-dev mailing list.  Replies are ]]
[[ not  forced  back  to the list, so be sure to Cc linuxppc-dev if your ]]
[[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting.   ]]