Re: patch for dmasound bug
From: Alvin Brattli <hidden>
Date: 1999-06-10 22:56:26
OK, this reply comes a bit late, but I didn't try the patch until now, so here goes: Ryan Nielsen:
This restores the rate/byteswap to normal after playing a beep if you for example stop timidity, make a beep, resume, the sound will be slower than normal (without this patch).
Although this patch might do what it was intended for, it has some unwanted consequences on the PowerBook G3 Series, namely that one gets a constant, really annoying hiss from the loudspeakers, most notably during the boot sequence. Without this patch, the hiss stops after a system beep (like when you do an "echo ^G" in a shell), but now even this does not help. So, if this patch is included in the standard distribution, I suspect we will hear a lot of complaints from PowerBook G3 users. To me, it seems like there is something wrong in the dmasound driver that causes this hiss; it just doesn't switch off all sound when it's supposed to. I don't know enough about the workings of the audio controller to go bug hunting here myself, so all I can do is just point out that there is a problem here :(
quoted hunk
--- linux/drivers/sound/dmasound.c 1999/02/05 05:45:42 1.41 +++ linux/drivers/sound/dmasound.c 1999/06/02 19:42:08@@ -3255,6 +3255,11 @@save_flags(flags); cli(); if (beep_playing) { st_le16(&beep_dbdma_cmd->command, DBDMA_STOP); + out_le32(&awacs_txdma->control, (RUN|PAUSE|FLUSH|WAKE) << 16); + out_le32(&awacs->control, + (in_le32(&awacs->control) & ~0x1f00) + | (awacs_rate_index << 8)); + out_le32(&awacs->byteswap, sound.hard.format != AFMT_S16_BE); beep_playing = 0; } restore_flags(flags);
aLViN -- :r .signature [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]] [[ and http://www.linuxppc.org/ for useful information before posting. ]]