Re: multiheaded console: vgacon + matroxfb

On Sun, 3 Jan 1999, Gerd Knorr wrote:

The good news:
==============

bogomips kraxel ~# xinit -- /cdrbuf/xc/programs/Xserver/XF86_SVGA :0
[ ... ]
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 0):
      fbdev, NV1, STG2000, RIVA128, RIVATNT, ET4000, ET4000W32, ET4000W32i,
      ^^^^^
[ ... ]
(--) SVGA: PCI: Matrox MGA 1064SG rev 3, Memory @ 0xff000000, 0xfe800000, MMIO @ 0xffbec000
(--) SVGA: chipset:  fbdev
(--) SVGA: videoram: 4096k
(**) SVGA: Using 16 bpp, Depth 16, Color weight: 565
(--) SVGA: Maximum allowed dot-clock: 90.000 MHz
(**) SVGA: Mode "1024x768": mode clock =  85.000
(**) SVGA: Mode "800x600": mode clock =  49.000
(**) SVGA: Mode "640x480": mode clock =  36.000
(**) SVGA: Mode "400x300": mode clock =  25.000
(**) SVGA: Mode "320x240": mode clock =  15.750
(**) SVGA: Mode "PAL": mode clock =  50.000
(--) SVGA: Virtual resolution set to 1024x768
fbdev: accelerator=Matrox MGA1064SG (Mystique), fb=0xff000000+4194304k, mmio=0xffbec000+16384
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: CPU to screen color expansion (TE/NonTE imagetext, TE/NonTE polytext)
(--) SVGA: XAA: Using 8 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: General lines and segments
(--) SVGA: XAA: Dashed lines and segments

Runs happily on the matrox mystique, even if it works as secondary
display.  Fully Accelerated.  Patches against XFree 3.3.3 available by

YES!! Thanks a lot!

mail.

Please send me a copy...

Greetings,

						Geert

--
Geert Uytterhoeven                     Geert.Uytterhoeven@cs.kuleuven.ac.be
Wavelets, Linux/{m68k~Amiga,PPC~CHRP}  http://www.cs.kuleuven.ac.be/~geert/
Department of Computer Science -- Katholieke Universiteit Leuven -- Belgium


[[ This message was sent via the linuxppc-dev mailing list. Replies are ]]
[[ not forced back to the list, so be sure to  Cc linuxppc-dev  if your ]]
[[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]]
[[ the message 'unsubscribe' to linuxppc-dev-request@lists.linuxppc.org ]]