Hi Corey,

Just a suggestion here.

  * Lots of CONFIG_8xx still occur.  I'm not sure what to do for these,
    it's hard to tell exactly what is 8xx specific and MBX specific.
    Are all MBX cards 8xx based?  I'd assume so, from the code.  And
    I doubt we are going to be able to get rid of these.

Would it be possible to keep in mind that the MBX is _not_ the only board
that uses the MPC8xx.  We're doing some work here with two different
boards that use MPC8xx processors, but are definitely _not_ MBX boards.
Perhaps have separate config options for the 8xx processor and the board
design.


i.e.
CONFIG_8xx
CONFIG_MBX  

Thanks,
Mark 


Mark S. Mathews

AbsoluteValue Software     Web:    http://www.absoval.com
P.O. Box 941149            e-mail: mark@absoval.com
Maitland, FL 32794-1149    Phone:  407.644.8582
USA                        Fax:    407.539.1294


[[ This message was sent via the linuxppc-dev mailing list. Replies are ]]
[[ not forced back to the list, so be sure to  Cc linuxppc-dev  if your ]]
[[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]]
[[ the message 'unsubscribe' to linuxppc-dev-request@lists.linuxppc.org ]]