From: Luca Coelho <redacted>
In some rare cases when the HW is in a bad state, we may get this
interrupt when prph_info is not set yet. Then we will try to
dereference it to check the sleep_notif element, which will cause an
oops.
Fix that by ignoring the interrupt if prph_info is not set yet.
Signed-off-by: Luca Coelho <redacted>
---
drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
index 14602d6d6699..8247014278f3 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
@@ -2266,7 +2266,12 @@ irqreturn_t iwl_pcie_irq_msix_handler(int irq, void *dev_id)
}
}
- if (inta_hw & MSIX_HW_INT_CAUSES_REG_WAKEUP) {
+ /*
+ * In some rare cases when the HW is in a bad state, we may
+ * get this interrupt too early, when prph_info is still NULL.
+ * So make sure that it's not NULL to prevent crashing.
+ */
+ if (inta_hw & MSIX_HW_INT_CAUSES_REG_WAKEUP && trans_pcie->prph_info) {
u32 sleep_notif =
le32_to_cpu(trans_pcie->prph_info->sleep_notif);
if (sleep_notif == IWL_D3_SLEEP_STATUS_SUSPEND ||--
2.34.1