diff --git a/Documentation/driver-api/firmware/built-in-fw.rst b/Documentation/driver-api/firmware/built-in-fw.rst
index bc1c961bace1..a9a0ab8c9512 100644
--- a/Documentation/driver-api/firmware/built-in-fw.rst
+++ b/Documentation/driver-api/firmware/built-in-fw.rst
@@ -8,11 +8,11 @@ the filesystem. Instead, firmware can be looked for inside the kernel
directly. You can enable built-in firmware using the kernel configuration
options:
- * CONFIG_EXTRA_FIRMWARE
- * CONFIG_EXTRA_FIRMWARE_DIR
+ * CONFIG_FW_LOADER_BUILTIN_FILES
+ * CONFIG_FW_LOADER_BUILTIN_DIR
There are a few reasons why you might want to consider building your firmware
-into the kernel with CONFIG_EXTRA_FIRMWARE:
+into the kernel with CONFIG_FW_LOADER_BUILTIN_FILES:
* Speed
* Firmware is needed for accessing the boot device, and the user doesn't
diff --git a/Documentation/x86/microcode.rst b/Documentation/x86/microcode.rst
index a320d37982ed..2cacc7f60014 100644
--- a/Documentation/x86/microcode.rst
+++ b/Documentation/x86/microcode.rst
@@ -114,13 +114,13 @@ Builtin microcode
=================
The loader supports also loading of a builtin microcode supplied through
-the regular builtin firmware method CONFIG_EXTRA_FIRMWARE. Only 64-bit is
-currently supported.
+the regular builtin firmware method using CONFIG_FW_LOADER_BUILTIN and
+CONFIG_FW_LOADER_BUILTIN_FILES. Only 64-bit is currently supported.
Here's an example::
- CONFIG_EXTRA_FIRMWARE="intel-ucode/06-3a-09 amd-ucode/microcode_amd_fam15h.bin"
- CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"
+ CONFIG_FW_LOADER_BUILTIN_FILES="intel-ucode/06-3a-09 amd-ucode/microcode_amd_fam15h.bin"
+ CONFIG_FW_LOADER_BUILTIN_DIR="/lib/firmware"
This basically means, you have the following tree structure locally::
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 999907dd7544..cfb09dc7f21b 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1315,8 +1315,8 @@ config MICROCODE
initrd for microcode blobs.
In addition, you can build the microcode into the kernel. For that you
- need to add the vendor-supplied microcode to the CONFIG_EXTRA_FIRMWARE
- config option.
+ need to add the vendor-supplied microcode to the configuration option
+ CONFIG_FW_LOADER_BUILTIN_FILES
config MICROCODE_INTEL
bool "Intel microcode loading support"
diff --git a/drivers/base/firmware_loader/Kconfig b/drivers/base/firmware_loader/Kconfig
index 5b24f3959255..2dc3e137d903 100644
--- a/drivers/base/firmware_loader/Kconfig
+++ b/drivers/base/firmware_loader/Kconfig
@@ -22,14 +22,14 @@ config FW_LOADER
You typically want this built-in (=y) but you can also enable this
as a module, in which case the firmware_class module will be built.
You also want to be sure to enable this built-in if you are going to
- enable built-in firmware (CONFIG_EXTRA_FIRMWARE).
+ enable built-in firmware (CONFIG_FW_LOADER_BUILTIN_FILES).
if FW_LOADER
config FW_LOADER_PAGED_BUF
bool
-config EXTRA_FIRMWARE
+config FW_LOADER_BUILTIN_FILES
string "Build named firmware blobs into the kernel binary"
help
Device drivers which require firmware can typically deal with
@@ -43,14 +43,21 @@ config EXTRA_FIRMWARE
in boot and cannot rely on the firmware being placed in an initrd or
initramfs.
- This option is a string and takes the (space-separated) names of the
+ Support for built-in firmware is not supported if you are using
+ the firmware loader as a module.
+
+ This option is a string and takes the space-separated names of the
firmware files -- the same names that appear in MODULE_FIRMWARE()
and request_firmware() in the source. These files should exist under
- the directory specified by the EXTRA_FIRMWARE_DIR option, which is
+ the directory specified by the FW_LOADER_BUILTIN_DIR option, which is
/lib/firmware by default.
- For example, you might set CONFIG_EXTRA_FIRMWARE="usb8388.bin", copy
- the usb8388.bin file into /lib/firmware, and build the kernel. Then
+ For example, you might have set:
+
+ CONFIG_FW_LOADER_BUILTIN_FILES="usb8388.bin"
+
+ After this you would copy the usb8388.bin file into directory
+ specified by FW_LOADER_BUILTIN_DIR and build the kernel. Then
any request_firmware("usb8388.bin") will be satisfied internally
inside the kernel without ever looking at your filesystem at runtime.
@@ -60,13 +67,15 @@ config EXTRA_FIRMWARE
image since it combines both GPL and non-GPL work. You should
consult a lawyer of your own before distributing such an image.
-config EXTRA_FIRMWARE_DIR
- string "Firmware blobs root directory"
+config FW_LOADER_BUILTIN_DIR
+ string "Directory with firmware to be built-in to the kernel"
depends on EXTRA_FIRMWARE != ""