Re: [RFC v2] mt76: mt7615: mt7622: fix ibss and meshpoint

My tests on todays OpenWrt Trunk with my and without my patch showed:
- MT7622: AP + AdHoc (only AP is working, in every case)
- BPI-MT7615: AP + AdHoc (with and without my patch still works).

I thought something would change if I apply my patch with the 
HW-Addresses. However everything stays the same:

With my patch:
AdHoc: Shenzhen_4e:4b:dd (38:83:9a:4e:4b:dd)
AP: address: 3a:83:9a:4e:4b:dd (3a:83:9a:4e:4b:dd)

Without my patch:
AdHoc: Shenzhen_4e:4b:dd (38:83:9a:4e:4b:dd)
AP: 3a:83:9a:4e:4b:dd (3a:83:9a:4e:4b:dd)

Bests
Nick

On 10/9/21 15:22, Daniel Golle wrote:

On Sat, Oct 09, 2021 at 12:37:53PM +0200, Nick wrote:

quoted

On 10/9/21 10:32, Kalle Valo wrote:

quoted

Nick Hainke [off-list ref] writes:

quoted

Fixes: d8d59f66d136 ("mt76: mt7615: support 16 interfaces").

The fixes tag should be in the end, before Signed-off-by tags. But I can
fix that during commit.

Thanks for feedback. Already changed that locally but I did not want to spam
you with another RFC v3. :)
I was able to organize me a BPI-MT7615 PCIE Express Card. With and without
this patch beacons were sent on the mt7615 pcie, so the patch did not make
any difference. However, the mt7622 wifi will only work with my patch.

Does Mesh+AP or Ad-Hoc+AP also work on MT7622 and does it still work on
MT7615E card with your patch applied?