Re: Multi-client EAPOL key timeout when not having RTNL lock protection

Hi Sathishkumar,

In the multi-client (64 or higher clients on single radio) test scenario 
of AP mode using hostapd, we are facing EAPOL key timeout for random 
clients.

wlan1: STA 00:41:c0:a8:03:10 WPA: received EAPOL-Key msg 4/4 in invalid 
state (7) – dropped

I think you'll probably have to share a more complete hostapd log, and
likely also send to Jouni/hostap list.

This is happening due to delay in transmission of association response 
frames for retried association request frames from the client and one of 
the association requests is received when EAPOL key exchange is in 
process.

You're talking about the AP, which is transmitting the association
response. How could the AP possibly have sent an EAPOL msg 1/4 before
getting an ACK on the association response? Why are there retries for
this anyway?

NL80211_CMD_NEW_STATION is received on hostapd when already 
EAPOL M3 is transmitted and waiting for EAPOL M4.

Are you sure this is with an in-kernel driver?

Hostapd should be creating the stations?

But since hostapd 
received NL80211_CMD_NEW_STATION, it resets the handshake process from 
M1 again by the time client sends M4 to see the above error.

Yeah, but ... why isn't hostapd doing that?

This delay is seen only after the commit, a05829a7222e ("cfg80211: avoid 
holding the RTNL when calling the driver") and not seen before/without 
this commit. We could see delay in processing of nl80211_get_key, 
nl80211_set_key, nl80211_new_key, nl80211_del_key and nl80211_tx_mgmt 
commands.

The delay and EAPOL key timeout is not seen when NL80211_FLAG_NEED_RTNL 
is set back to internal_flags of nl80211_get_key, nl80211_set_key, 
nl80211_new_key, nl80211_del_key and nl80211_tx_mgmt messages alone.

Please share your comments on this issue requiring RTNL lock for key and 
mgmt nl80211 commands.

Not going to happen, you need to find the real cause of this.

johannes