[Bugreport] ath9k dynack not working/low performance on 5 & 10MHz Bandwidth

Hello Lorenzo Bianconi,

we are running a set of R11e-2HPnD devices and having trouble getting
dynack working properly.
Setup:
* linux-5.4.123
* OpenWRT (current development branch) with wireless backports-5.10.34-1
* distance 2m between ap and sta
* Low ambient noise wifi environment
We experienced some non working dynack or low performance in the
connection due to too high calculated ackto's.

Here is a ath9k debug output example for a non working dynack @ 10Mhz BW:

Wed Jun  2 19:08:50 2021 kern.debug kernel: [  400.500427] ath: phy0:
{48:8f:5a:3c:bb:03} tx sample 44905341 [dur 8720][h 29-t 30]
Wed Jun  2 19:08:50 2021 kern.debug kernel: [  400.500437] ath: phy0:
ack_ts 44844835 st_ts 44905341 st_dur 8720 [17-29]
Wed Jun  2 19:08:50 2021 kern.debug kernel: [  400.500445] ath: phy0:
ack_ts 44923425 st_ts 44905341 st_dur 8720 [18-29]
Wed Jun  2 19:08:50 2021 kern.debug kernel: [  400.554642] ath: phy0: rx
sample 44977693 [h 18-t 20]
Wed Jun  2 19:08:50 2021 kern.debug kernel: [  400.554701] ath: phy0:
{48:8f:5a:3c:bb:03} tx sample 44964984 [dur 6032][h 30-t 31]
Wed Jun  2 19:08:50 2021 kern.debug kernel: [  400.554710] ath: phy0:
ack_ts 44923425 st_ts 44964984 st_dur 6032 [18-30]
Wed Jun  2 19:08:50 2021 kern.debug kernel: [  400.554718] ath: phy0:
ack_ts 44977693 st_ts 44964984 st_dur 6032 [19-30]
Wed Jun  2 19:08:50 2021 kern.debug kernel: [  400.577890] ath: phy0: rx
sample 45000939 [h 19-t 21]
Wed Jun  2 19:08:50 2021 kern.debug kernel: [  400.577946] ath: phy0:
{48:8f:5a:3c:bb:03} tx sample 44998471 [dur 912][h 31-t 32]
Wed Jun  2 19:08:50 2021 kern.debug kernel: [  400.577956] ath: phy0:
ack_ts 44977693 st_ts 44998471 st_dur 912 [19-31]
Wed Jun  2 19:08:50 2021 kern.debug kernel: [  400.577964] ath: phy0:
ack_ts 45000939 st_ts 44998471 st_dur 912 [20-31]

THe above output is generated in dynack.c by

        ath_dbg(ath9k_hw_common(ah), DYNACK,
            "ack_ts %u st_ts %u st_dur %u [%u-%u]\n",
            ack_ts, st_ts->tstamp, st_ts->dur,
            da->ack_rbf.h_rb, da->st_rbf.h_rb);

The ackto is afterwards calculated by

        if (ack_ts > st_ts->tstamp + st_ts->dur) {
            ackto = ack_ts - st_ts->tstamp - st_ts->dur;

Filling in the values of the first sample:

(ack_ts > st_ts->tstamp + st_ts->dur) ?
(44844835 > 44905341+8720) ?
(44844835 > 44914061) ? ... not given

Therefore a new ackto is not calculated and i can also see that in the
ack_to file:

600 A
600 A
600 A
...

These look like the default values to me (and do not change), but
ath_dynack_get_max_to() should return 750 A for our 10MHz BW case - this
looks also suspecious to me.

For 5 MHz bandwidth there is a ackto calculated (~382 A, looks a bit too
high to me) but the performance is way below expectation (<1MBit)
For 20 MHz bandwidth there is a ackto calculated (51 A) and the
performance is fitting the expectation.
If you want to take a look at the logs for each of these cases for ap
and sta, you can download them here:
https://cloud.hs-augsburg.de/s/eworxkJoL6JXYzZ

Did anyone else experience such a behaviour on non 20MHz Channels or
does anyone have an idea on where this behaviour might originate from?
I am not experienced in the ath9k driver code, but a uneducated guess
might be that the ring buffer where the dynack algorithm is taking its
frame-samples from is not behaving as expected for the 5&10MHz case.

regards,
julian dorner