[PATCH 1/2] brcmfmac: fix setting of station info chains bitmask
From: Alvin Šipraga <ALSI@bang-olufsen.dk>
Date: 2021-05-06 13:20:21
Subsystem:
broadcom brcm80211 ieee802.11 wireless drivers, the rest · Maintainers:
Arend van Spriel, Linus Torvalds
The sinfo->chains field is a bitmask for filled values in chain_signal
and chain_signal_avg, not a count. Treat it as such so that the driver
can properly report per-chain RSSI information.
Before (MIMO mode):
$ iw dev wlan0 station dump
...
signal: -51 [-51] dBm
After (MIMO mode):
$ iw dev wlan0 station dump
...
signal: -53 [-53, -54] dBm
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Fixes: cae355dc90db ("brcmfmac: Add RSSI information to get_station.")
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index f4405d7861b6..afa75cb83221 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c@@ -2838,6 +2838,7 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev, count_rssi = 0; for (i = 0; i < BRCMF_ANT_MAX; i++) { if (sta_info_le.rssi[i]) { + sinfo->chains |= BIT(count_rssi); sinfo->chain_signal_avg[count_rssi] = sta_info_le.rssi[i]; sinfo->chain_signal[count_rssi] =
@@ -2848,8 +2849,6 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev, } if (count_rssi) { sinfo->filled |= BIT_ULL(NL80211_STA_INFO_CHAIN_SIGNAL); - sinfo->chains = count_rssi; - sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL); total_rssi /= count_rssi; sinfo->signal = total_rssi;
--
2.31.1