Re: [PATCH v5 08/24] wfx: add bus_sdio.c
From: Ulf Hansson <hidden>
Date: 2021-03-22 12:21:54
Also in:
linux-devicetree, linux-mmc, lkml, netdev
On Mon, 15 Mar 2021 at 14:25, Jerome Pouiller [off-list ref] wrote:
From: Jérôme Pouiller <jerome.pouiller@silabs.com> Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> --- drivers/net/wireless/silabs/wfx/bus_sdio.c | 259 +++++++++++++++++++++ 1 file changed, 259 insertions(+) create mode 100644 drivers/net/wireless/silabs/wfx/bus_sdio.c
[...]
+static const struct sdio_device_id wfx_sdio_ids[] = {
+ { SDIO_DEVICE(SDIO_VENDOR_ID_SILABS, SDIO_DEVICE_ID_SILABS_WF200) },
+ { },
+};
+MODULE_DEVICE_TABLE(sdio, wfx_sdio_ids);
+
+struct sdio_driver wfx_sdio_driver = {
+ .name = "wfx-sdio",
+ .id_table = wfx_sdio_ids,
+ .probe = wfx_sdio_probe,
+ .remove = wfx_sdio_remove,
+ .drv = {
+ .owner = THIS_MODULE,
+ .of_match_table = wfx_sdio_of_match,It's not mandatory to support power management, like system suspend/resume. However, as this looks like this is a driver for an embedded SDIO device, you probably want this. If that is the case, please assign the dev_pm_ops here and implement the ->suspend|resume() callbacks. [...] Kind regards Uffe