[PATCH 2/3] wcn36xx: Enable firmware link monitoring
From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Date: 2020-10-31 02:22:27
Subsystem:
atheros ath generic utilities, qualcomm wcn36xx wireless driver, the rest · Maintainers:
Jeff Johnson, Loic Poulain, Linus Torvalds
This patch switches on CONNECTION_MONITOR. Once done it is up to the firmware to send keep alive and to monitor the link state. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> --- drivers/net/wireless/ath/wcn36xx/main.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index 706728fba72d..e924cc4acde0 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c@@ -1246,6 +1246,7 @@ static int wcn36xx_init_ieee80211(struct wcn36xx *wcn) ieee80211_hw_set(wcn->hw, HAS_RATE_CONTROL); ieee80211_hw_set(wcn->hw, SINGLE_SCAN_ON_ALL_BANDS); ieee80211_hw_set(wcn->hw, REPORTS_TX_ACK_STATUS); + ieee80211_hw_set(wcn->hw, CONNECTION_MONITOR); wcn->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP) |
--
2.28.0