[PATCH v3 07/22] mac80211: s1g: choose scanning width based on frequency
From: Thomas Pedersen <hidden>
Date: 2020-09-08 19:04:40
Subsystem:
mac80211, the rest · Maintainers:
Johannes Berg, Linus Torvalds
An S1G BSS can beacon at either 1 or 2 MHz and the channel width is unique to a given frequency. Ignore scan channel width for now and use the allowed channel width. Signed-off-by: Thomas Pedersen <redacted> --- net/mac80211/scan.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 5ac2785cdc7b..5002791fe165 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c@@ -905,6 +905,17 @@ static void ieee80211_scan_state_set_channel(struct ieee80211_local *local, local->scan_chandef.center_freq1 = chan->center_freq; local->scan_chandef.freq1_offset = chan->freq_offset; local->scan_chandef.center_freq2 = 0; + + /* For scanning on the S1G band, ignore scan_width (which is constant + * across all channels) for now since channel width is specific to each + * channel. Detect the required channel width here and likely revisit + * later. Maybe scan_width could be used to build the channel scan list? + */ + if (chan->band == NL80211_BAND_S1GHZ) { + local->scan_chandef.width = ieee80211_s1g_channel_width(chan); + goto set_channel; + } + switch (scan_req->scan_width) { case NL80211_BSS_CHAN_WIDTH_5: local->scan_chandef.width = NL80211_CHAN_WIDTH_5;
@@ -925,8 +936,14 @@ static void ieee80211_scan_state_set_channel(struct ieee80211_local *local, else local->scan_chandef.width = NL80211_CHAN_WIDTH_20_NOHT; break; + case NL80211_BSS_CHAN_WIDTH_1: + case NL80211_BSS_CHAN_WIDTH_2: + /* shouldn't get here, S1G handled above */ + WARN_ON(1); + break; } +set_channel: if (ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL)) skip = 1;
--
2.20.1